Dahua ASA4214F - System Operation: Features

40
 Select “Wiegand Output Setting” when the device itself works as a card reader; controller
can be connected. Please refer to Table 3-7 for details.
Parameter
Note
Wiegand Output Type
Digits of output card no. or ID that can be recognized by the device.
Wiegand 26: recognize 3 bytes, 6 digits.

Wiegand 34: recognize 4 bytes, 8 digits.

Wiegand 66: recognize 8 bytes, 16 digits.

Pulse Width
Set pulse width and interval of Wiegand output.
Pulse Interval
Output Data Type
Obtain data type.
User ID: if user ID is selected, output corresponding data

according to user ID.
Card no.: if card no. is selected, output corresponding data

according to user card number.
Table 3-7
3.9.4 Wi-Fi
Add Wi-Fi, and thus connect the device into network.
Select “Connection > Wi-Fi”, and the screen displays Figure 3-39. 步骤1
Figure 3-39
Select “ON” to enable Wi-Fi function. 步骤2
Press to select the needed wireless network. 步骤3
Enter the password and press to save. 步骤4
3.10 Features
Enter main menu and select “Features”, and the screen displays Figure 3-40.