7
3 Unlocking the Door
Swipe card on the card reader to open the door. For card reader with keypad, you can also unlock
the door by entering the password.
●
Unlock the door through public password: Enter the public password, and then tap
#
.
●
Unlock the door through user password: Enter the user ID and tap
#
, and then enter the user
password and tap
#
.
●
Unlock the door through card + password: Swipe card, enter the password, and then tap
#
.
If the password is correct, the indicator is green and the buzzer sound once. If the password is
incorrect, the indicator is red, and the buzzer sounds 4 times (RS-485 communication) or sounds 3
times (Wiegand communication or no signal line is connected).
To Next Page
Loading...
