8
5 Quick Operation
5.1 Login through Web
You can log in to the Device through the web for management and operation. For details, see web
operation manual.
For first login, you need to change the password according to the interface prompt.
Table 5-1 Default factory configuration
Parameter Description
IP address 192.168.1.110/255.255.255.0
Username admin
Password
●
Web: No initial password, user-defined during initialization.
●
iLinksView : lt_91_il_02_nmp
When using iLinksView for device management, ensure that the username
and password of the Device matches that of iLinksView, otherwise
iLinksView will not be able to discover the Device.
5.2 Restoring to Factory Settings
There are two ways to restore the Device to factory settings.
●
Press and hold the
Reset
button for 5 seconds to restore the Device to factory settings.
●
Log in to web or use command line. For details, see the web operation manual or command line
reference manual.
To Next Page
Loading...
