Quick Start Guide
1
1 Introduction
Components 1.1
Cable type might vary with different devices, and the actual product shall prevail.
Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit
and water damage. For the detailed operation, see the FAQ Manual.
Structure ComponentsFigure 1-1
For more information about cable ports, see Table 1-1.
Table 1-1 Cable information
Port Port Name Note
1 Speaker Outputs audio.
2 Power input
Inputs DC 12V power. Please be sure to supply power as instructed in
the Guide.
Device abnormity or damage could occur if power is not supplied
correctly.
3 Ethernet
Connects to network with network cable.
Provides power to the device with PoE.
4 Alarm I/O
Includes alarm signal input and output ports. For detailed information,
see Table 1-2.
5 Audio input Connects to sound-pick-up device to receive audio signal.
6 Audio output Connects to speaker to output audio signal.
For more information about I/O port, see Table 1-2.
To Next Page
Loading...
