Need help?Do you have a question about the Dahua DH-IPC-HFW2100P and is the answer not in the manual?
General| Model | DH-IPC-HFW2100P |
|---|---|
| Scanning System | Progressive |
| S/N Ratio | > 50dB |
| IR Distance | Up to 30m |
| IR On/Off Control | Auto/ Manual |
| Lens Type | Fixed lens |
| Focal Length | 3.6mm |
| Lens Mount | M12 |
| Max. Resolution | 1920x1080 |
| Max. User Access | 10 users |
| Smart Phone | iOS, Android |
| Ingress Protection | IP67 |
| Network Interface | RJ45 |
| Signal System | PAL/NTSC |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Effective Pixels | 1920(H) x 1080(V) |
| Electronic Shutter Speed | 1/3 s to 1/100, 000 s |
| Min. Illumination | 0Lux (IR on) |
| Video Compression | H.265/H.264 |
| Frame Rate | 25/30fps |
| Bit Rate | 32Kbps to 8Mbps |
| Ethernet | 10M/100M Ethernet |
| Protocol | HTTP, TCP/IP, UDP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP |
| Power Supply | DC12V |
| Working Environment | -30°C ~ +60°C (-22°F ~ +140°F), Humidity 95% or less (non-condensing) |
| Day/Night | Auto (ICR), Color, B/W |
Ensures safe operation by adhering to SELV and Limited power source requirements.
Protects the device from damage during transit and setup by avoiding stress, vibration, and water.
Guides safe camera installation, including power cut-off and following manufacturer recommendations.
Stipulates that qualified personnel must perform examination and repair work to prevent issues.
Details proper installation environment, protection from radiation, ventilation, and grounding for optimal performance.
Outlines safe daily maintenance procedures, including device shutdown and power cable disconnection.
Advises on using recommended accessories and proper cleaning methods for optical components.
Introduces the network camera, its integrated technologies, and core capabilities.
Details user management, storage, network monitoring, management, power, and assistant functions.
Lists technical specifications including processor, OS, image sensor, video parameters, and interface details.
Provides default configuration settings for camera parameters like brightness, contrast, and network.
Identifies and explains the function of ports and indicators located on the camera's rear panel.
Presents physical dimensions and structural illustrations of the network camera.
Explains the tool's purpose for IP address search, modification, and device upgrade.
Provides instructions on using the tool's interface for device discovery and access.
Details the steps required to establish a proper network connection for the camera.
Guides accessing the camera via web browser and the initial login process.
To Next Page