Dahua DH-IPC-HFW2100P User Manual

3
Video
Motion Detect
396 (18*22) detection zones; sensitivity level ranges from 1 to 100;
Area threshold ranges from 1 to 100.
Activation event: video storage, image snapshot, log, email and etc.
Record and Backup
Record Priority
Manual>External alarm >Video detect>Schedule
Storage
Management
Support display network storage status
Network
Wire Network
1-channel wire Ethernet port, 10/100 Base-T Ethernet.
Network Protocol
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP,
SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour,
SNMP.
Remote
Operation
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc.
AUX Interfac e
Video Output
1-ch analog video output. BNC port.
Network
Interface
1-ch wire Ethernet port. 10/100 Base-T Ethernet
RS485 Port
PTZ Control port. Support various protocols.
General Parameter
Power
Support DC12V power or PoE.
Warning！
Do not connect these two power supplying sources to the device
at the same time; it may result in device damage!
Power
Consumption
2.5W MAX
Working
Temperature
-10℃~+60℃
Working
Humidify
10%~90%
Dimensions(mm)
66.2*62.8*131
Weight
196g（Excluding box）
Installation
Installation with the bracket.
1.3.2 Factory Default Setup
Please refer to the following sheet for factory default setup information.
Setup
Item
Default Setup
IPC-HF2100 Series
Camera
Conditions
Config File
Normal
Brightness
50
Contrast
50
Saturation
50
Sharpness
50
Anti-flicker
Outdoor
Exposure Mode
Auto
Auto Iris
On
Profile
Auto
Day&night
Auto
bezpeka-shop.com

Dahua DH-IPC-HFW2100P Specifications

General

Brand	Dahua
Model	DH-IPC-HFW2100P
Category	Security Camera
Language	English