EasyManua.ls Logo

Dahua DH-PFS3010-8ET-96 - 2.2 Rear Panel

Dahua DH-PFS3010-8ET-96
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Device Structure 3
2 Device Structure
Front Panel 2.1
The front panel is shown in Figure 2-1.
Front panel Figure 2-1
Please refer to Table 2-1 for the description of front panel.
Table 2-1 The description of front panel
Name
Description
10/100 Base-T
8×10/100 Mbps self-adaptive PoE power supply ports.
10/100/1000Base-T
2×10/100/1000 Mbps self-adaptive uplink ports.
DIP switch
Transmission mode selection, you can select Default or
Extend mode via the switch.
Link/Act
Single port Link status indicator light.
PoE
Single port PoE status indicator light.
PWR
Power indicator light, meanwhile it is the PoE power supply
status indicator light as well.
Back Panel 2.2
The back panel is shown in Figure 2-2.
Back panel Figure 2-2
Please refer to Table 2-2 for the description of back panel.

Other manuals for Dahua DH-PFS3010-8ET-96

Related product manuals