- 6 -
3 WEB Client Operation
3.1 Login
Make sure the device is connected to PC before logging in Web, and make the PC and device in the
same network segment. The steps of logging in WEB client are as follows:
Step 1
Enter device IP address in the IE address bar (default IP address is: 192.168.1.110), press “Enter”,
and the system displays the interface as shown in Figure 3-1.
Figure 3-1
Step 2
Enter “User name” and “password”; single click “Login”, the system will enter the main interface of Web
client.
Note:
Device factory default password is empty; users only need to enter user name “admin”, and log in
without entering password.
3.2 Device Info
：Greens means link is normal; ：Yellow means abnormality, general; ：Red means abnormality,
serious. See Figure 3-2 for more details.
To Next Page
Loading...
