Do you have a question about the Dahua DH-XVR7108HE-4KL-X and is the answer not in the manual?
Compression Format | H.265+/H.265/H.264+/H.264 |
---|---|
Max HDD Capacity | 10TB |
USB Interface | 2 x USB 2.0 |
Video Input | 8 channels |
Video Output | 1 HDMI, 1 VGA |
Max Resolution | 4K (3840x2160) |
Storage Capacity | Up to 10TB per HDD |
Network Interface | 1 x RJ-45 (10/100/1000 Mbps) |
Power Supply | DC12V/2A |
Technology | Analog / IP Hybrid |
Max IP Camera Input | 8-channel |
Hard Drive Bays | 1 |
Operating Temperature | -10°C to +55°C |
Operating Humidity | 10% to 90% |
Essential steps to secure the system against unauthorized access and cyber threats.
Crucial safety warnings and guidelines to prevent injury and device damage.
Instructions for properly installing a Hard Disk Drive (HDD) into the device for storage.
Procedures for initial setup, including booting and basic device configuration.
Methods to reset the admin password via local interface or web, using QR code or security questions.
Guide for using the Startup Wizard to configure essential device settings during initial setup.
How to access and navigate the live video feed from connected cameras on the device interface.
Adjusting image parameters like saturation, contrast, and brightness for connected cameras.
Configuration of video encoding parameters for main and sub streams to optimize storage and quality.
Configuration of basic storage options for HDD full scenarios, file length, and auto-deletion.
Setting up schedules for video recording, including channels, alarm settings, and armed periods.
Configuration of alarm outputs for system events like HDD, Network, and User abnormalities.
Configuration of intelligent detection features such as SMD, face detection, and IVS rules.
Settings for backing up recorded videos and snapshots to external storage devices via USB or FTP.
Configuration of network settings, including TCP/IP, Wi-Fi, 3G/4G, PPPoE, DDNS, UPnP, and SNMP.
Management of user accounts, groups, ONVIF users, and security questions for system access.
Management of stored resources like HDD information, formatting, quotas, and record estimates.
Instructions on accessing and logging into the device's web interface for remote management.
Procedures for resetting the admin password via the web interface using QR code or security questions.