Alarm Control Panel Installer Manual
65
Provide a correct password (it will match with a valid one stored in a control panel). Step 2
The password must be the same as the one used locally by the keypad but here must have 6 digits.
If it has 4 or 5 digits on the keypad, prefix it with zeros before the code to bring it to 6 digits (for
example, 001234).
User codes less than 6 digits will not be available in the interactive vocal call.
A procedure voice broadcasting message starts if the code is correct or a voice broadcasting "Input Step 3
Error" starts if you use a wrong code.
To Next Page
Loading...
