Alarm Control Panel Installer Manual
67
Voice prompts during entering password process Figure 1-37
SMS MESSAGES 1.38
If equipped of the 2G/4G module, the Alarm Control Panel is able to transmit and receive SMS as
command and request to state.
After entering the Installer Menu, press and to scroll up and down until you reach the
Step 1
SMS MESSAGES menu. See Figure 1-38.
SMS messages Figure 1-38
Press to enter the programming mode. Step 2
Press and to select the SMS message that you want to configure, and then press Step 3
.
In the SMS SEND submenu, select TRUE or FALSE. Step 4
TURE: The alarm event links this SMS message.
FALSE: The SMS message linkage is not used.
Press to return to the SMS message selection menu. Step 5
To Next Page
Loading...
