Alarm Control Panel Installer Manual
68
Then you can continue with programming other SMS messages, or press to return to the
SMS MESSAGES menu from where you can press and to move to the next menu or
press to exit from the Installer Menu.
To send SMS messages as remote control command, e.g. arming or disarming, you have to write, on your
mobile phone a specific SMS with a pre-format composition (-means empty space).
Pay attention at the empty space between user code and command and/or numbers. The user code must
be an authorized control panel user code (4 digits or 6 digits will be accepted). Upper case or lower case
text SMS will be accepted. For the available commands/contents, see Table 1-32, Table 1-33 and Table
1-34.
Command explanation: Take 1234 TOTAL 1 2 3 as an example. "1234" represents password,
"TOTAL" represents command, "1 2 3" represent command object.
Table 1-32 Smartphone sending SMS to controller
In order to let you know how many spaces are in the command, the symbol “ ” is used in the Command
column in Table 1-32 to indicate spaces. One “ ” stands for one space.
Table 1-33 Controller sending SMS to smartphone
To Next Page
Loading...
