12
You can select more than one check box and add cameras in batches.
Figure 1-14 Add IP camera by search result
Result
●
If the status of the added camera is green (
), it indicates the camera is properly added to the
NVR.
●
If the status of the added camera is red (
), it indicates connection failure between the camera
and the NVR. Check the parameters of the camera such as password, protocol and channel
number, and then try adding it again.
1.4.3 Manually Adding IP Camera
You can add an IP camera by IP information at one time.
Prerequisites
Make sure that the cameras you want to add have already been initialized and connected to the
right network.
Procedure
Step 1 Select Main Menu > CAMERA > Camera List > Add Camera.
Step 2 Click Manual Add.
To Next Page
Loading...
Need help?
General
