Need help?Do you have a question about the Dahua HCVR7208A-S3 and is the answer not in the manual?
General| Main Processor | Dual-core processor |
|---|---|
| Operating System | Embedded Linux |
| Video Input | 8 channels |
| Two-way Talk | Yes |
| Max. User Access | 128 users |
| Audio Input | 1 channel |
| Audio Output | 1 channel |
| IP Camera Input | 2 channels |
| Video Compression | H.264 |
| Audio In/Out | 1/1 |
| Bit Rate | 32Kbps to 6Mbps |
| Record Mode | Manual, Schedule, Motion Detection |
| Record Interval | Pre-record: 1~30s |
| Video Output | HDMI, VGA |
| HDMI Output | 1 |
| VGA Output | 1 |
| Resolution | 1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768 |
| Display Split | 1/4/8 |
| OSD | Yes |
| Network Interface | 1 RJ45 10M/100M |
| Network Functions | DHCP, DDNS, NTP, PPPoE, UPnP, RTSP, SMTP, Alarm Server, P2P |
| Smart Phone | iOS, Android |
| HDD Interface | 1 SATA |
| Max HDD Capacity | 6TB |
| USB Interface | 2 USB 2.0 |
| Power Supply | AC 100~240V, 50/60Hz |
| Power Consumption | <10W (without HDD) |
| Working Environment | -10°C ~ +55°C (+14°F ~ +131°F), 10~90% RH |
Details the technical specifications for various DVR series, covering system, video, audio, and communication parameters.
Step-by-step guide for installing Hard Disk Drives (HDDs) into the DVR device.
Details how to connect video input sources and output devices to the DVR for monitoring.
Guides on connecting external alarm devices to the DVR's input and output ports for event handling.
Guides through the initial setup process, including boot-up, device initialization, and password protection.
Covers various operational procedures like search, face search, and backup functions.
Outlines the system settings for camera, network, event, storage, and other configurations.
Guides on establishing a network connection for web client access, checking requirements and default settings.
Steps for initial device setup, including setting the admin password and security questions.
Instructions for accessing the device via a web browser by entering the IP address and logging in.
Introduces basic DVR setups and system configurations, covering camera, network, event, storage, and system settings.
To Next Page