396 (18*22) detection zones;sensitivity level ranges from 1 to 6 (The
6
th
level has the highest sensitivity)
Activation event: video storage, image snapshot, log, email function
and etc.
Manual>External alarm >Video detect>Schedule
1-ch 10/100 M Ethernet , RJ45 port
HTTP, TCP/IP, ARP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP,
DNS, DDNS, PPPOE, IPv4/6, SNMP, UPNP, NTP
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
DC12V power and PoE.
Warning!
Do not connect these two power supplying sources to the device
at the same time; it may result in device damage!
Fixed on the wall, ceiling and etc.
1.4 Factory Default Setup
Please refer to the following sheet for factory default setup information.