Dahua NVR1108HS-W Series User Manual

User's Manual
113
Figure 4-23 Device manager
2) Tap on the top right corner.
The interface requiring device initialization is displayed. A pop-up message
reminding you to make sure the Device is initialized is displayed.
3) Tap
OK
.
● If the Device has not been initialized, Tap
Device Initialization
to perform
initializing by following the onscreen instructions.
● If the Device has been initialized, you can start adding it directly.
4) Tap
Add Device
.
The
Add Device
interface is displayed. See Figure 4-24.

Dahua NVR1108HS-W Series Specifications

General

Brand	Dahua
Model	NVR1108HS-W Series
Category	Network Hardware
Language	English