Local Basic Operations 119
Step 4 Click again to stop smart search function.
The motion detect region cannot be the full screen zone.
The motion detect region adopts the current whole play pane by default.
Selects the other file on the list, system begins playing the motion detect footages
of other file.
The time bar unit switch, backward play, frame by frame are null when system is
playing motion detect file.
4.6.4 Mark Playback
When you are playback record, you can mark the record when there is important information.
After playback, you can use time or the mark key words to search corresponding record and
then play. It is very easy for you to get the important video information.
Add Mark
When system is playback, click Mark button , you can go to the following interface. See
Figure 4-98.
Figure 4-98
Playback Mark
During 1-window playback mode, click mark file list button in Figure 4-92, you can go to
mark file list interface. Double-click one mark file, you can begin playback from the mark time.
Play before mark time
Here you can set to begin playback from previous N seconds of the mark time.
Usually, system can playbacks previous N seconds record if there is such kind of record file.
Otherwise, system playbacks from the previous X seconds when there is such as kind of record.
Mark Manager
Click the mark manager button on the Search interface (Figure 4-92); you can go to
Manager interface. See Figure 4-99. System can manage all the record mark information of
current channel by default. You can view all mark information of current channel by time.
To Next Page
Loading...
Need help?
General