Local Basic Operations 54
5) Tap P2P.
The P2P interface is displayed. See Figure 4-25.
Figure 4-25
6) Enter a name for the NVR, the username and password, scan the QR code under
Device SN.
7) Tap Start Live Preview.
The Device is added and displayed on the live view interface of the cell phone. See
Figure 4-26.
Figure 4-26
4.1.4.4 Registration
If you do not select Smart add function during the initialization process, go to the remote Device
interface to register a remote device.
To Next Page
Loading...
