Need help?Do you have a question about the Dahua Villa VTO Series and is the answer not in the manual?
General| Ingress Protection | IP65 |
|---|---|
| Power Consumption | ≤12W |
| Video Resolution | 1920x1080 (Full HD) |
| Camera | 2MP CMOS |
| Audio Compression | G.711 |
| Audio Input | Built-in microphone |
| Audio Output | Built-in speaker |
| Connectivity | Ethernet |
| Ethernet | 10/100Mbps |
| Network Protocol | TCP/IP |
| Supported Protocols | RTSP |
| Alarm Output | 1 channel |
| RS-485 | Yes |
| Wiegand | Yes |
| Tamper Switch | Yes |
| Operating Temperature | –30 °C to +60 °C (–22 °F to +140 °F) |
| Power Supply | PoE or 12V DC |
| Video Compression | H.265 |
Essential steps for securing the system, including password changes and firmware updates.
Specifies environmental and operational conditions for safe device use.
Details necessary power supply requirements and safety considerations.
Specifies conditions to avoid and requirements for professional installation.
Guides through essential VTO configuration steps.
Detailed steps for initializing the VTO via its web interface.
Instructions for setting IP address, subnet mask, and gateway.
Guides on setting up the SIP server for intercom functionality.
Instructions for downloading and installing the mobile application.
Steps to add a VTO device using the P2P connection method.
Procedure for configuring VTO network settings and generating QR codes.
How to view live video and perform remote actions via the app.
Instructions for subscribing to VTOs to receive push notifications.
To Next Page
