Dahua VTO3211D-P2 User Manual

13
Main interface
Select Local Setting > Basic.
Device properties
In the No. input box, enter the VTO number you planned for the VTO you are operating, and
then click Confirm to save.
4.3.3 Configuring Network Parameters
Select Network Setting > Basic.
TCP/IP information
Enter the network parameters you planed, and then click Save.
The VTO will restart, and you need to modify the IP address of your PC to the same network
segment as the VTO to log in again.

Dahua VTO3211D-P2 Specifications

General

Brand	Dahua
Model	VTO3211D-P2
Category	Intercom System
Language	English