17
br
di
Fr
ot
EN
To adjust the brightness:
The brightness changes after confirming the modification.
You can also reduce the brightness of the display through
the control's key. From the display off, press the icon for
20 sec. The message "01" will appear. Press to decrease
brightness "00". Wait 30 sec. for the correct settings to be
verified.
Display Operation
- the brightness adjustment range is from 00 to 01
- increase and decrease the brightness with the icons
Adjusting the brightness of the display
To change the digital input, select "di" menu:
By default, digital input is set to CP.
By selecting one of the other inputs (CO,CC) the
seasonality is locked. It is not possible to modify it through
the key of the control.
For return to the default settings, set the digital input to
"CP".
Display Operation
- CP / clean contact (default)
- CO / cooling open
- CC / cooling close
Settings of the digital input
To reset the control to factory settings:
Display Operation
- select "YS" to reset the settings
- select "no" to keep the current settings
Factory reset
Use this adjustment carefully.
Use this adjustment only after having actually detected
a discrepancy compared with the actual room temperature
using a reliable device.
Adjust the value in a range of - 9 °C to + 12 °C, at
variations of 0,1 °C.
After 30 seconds from the last action, the control goes
off and the settings is memorised.
Display Operation
- the adjustment range is from -9 to 12
Probe T regulation offset (room temperature probe)
To Next Page
Loading...
