Daikin Altherma EKRTCTRL2 - 8 Versions with Connections on the Righ; Motor Connection in Versions with Hydraulic Connections on the Right EKREPLH

21
S
I
U
D
E
C
D
E
D
E
SW GRL
8.1
EKRTCTRL1, EKRTCTRL2
EN
VERSIONS WITH CONNECTIONS ON THE RIGHT
Should the battery hydraulic connection positions need to
be inverted from the left to the right hand side of the unit,
the electrical connection box is also inverted, but as the fan
motor and the grill safety micro switch must stay in position,
the EKREPLH kit must be used as an accessory.
The cable, with male/female connectors, is connected to the
motor on the right and to the quick connector on the left
(MOTOR) on the board (ref. D).
Furthermore, the two terminals connected to the grill safety
micro switch are extended and connected on the left hand
side to contact S1 on the board (ref. E).
The cables should be passed behind the unit through the
dedicated hole (ref. C).
Motor connection in versions with hydraulic connections on the right EKREPLH