Need help?Do you have a question about the Daikin altherma ERLQ011CAW1 and is the answer not in the manual?
General| Type | Air-to-water heat pump |
|---|---|
| Heating Capacity | 11.2 kW |
| Energy Efficiency Class (Heating) | A++ |
| Energy Efficiency Class (Cooling) | A+ |
| Refrigerant | R-32 |
| Operating Temperature Range (Heating) | -25 to 35 °C |
| Cooling Capacity | 9 kW |
| Power Supply | 230V / 1Ph / 50Hz |
| Operating Temperature Range (Cooling) | 10°C to 46°C |
Explains the severity and probability of occurrence for DANGER, WARNING, CAUTION, and NOTICE symbols.
General advice on safety equipment, contacting dealers, and using Daikin accessories.
Details on safely working with electrical parts, including power cutoff and voltage checks.
Warning against touching hot/cold piping and internal parts during and after operation.
Crucial warnings for installation: using qualified personnel, proper wiring, refrigerant handling, and foundation.
Strict cautions for keeping the system clean, dry, and tight when handling R410A refrigerant.
Criteria for selecting a suitable installation site, including ventilation, noise, and stability.
Warnings about mixing refrigerants, ventilating rooms during leaks, and using R410A specific tools.
Steps required after piping completion: checking for leaks and removing moisture.
General guidelines and warnings for charging refrigerant, including liquid state charging and cylinder positioning.
Warnings for authorized electricians and compliance with applicable legislation and high voltage precautions.
Guidelines for wiring work, including interrupting circuits, using copper wires, and earth leakage breakers.
Checks for electrical wiring, earth wire, refrigerant piping, and insulation before performing the test run.
Steps for carrying out the test run to ensure all functions and parts are working properly.
Troubleshooting common issues and error codes displayed on the remote controller during initial installation.
Safety measures and checks before performing maintenance, including electrical safety and component handling.
To Next Page