Need help?Do you have a question about the Daikin altherma ERLQ016CAW1 and is the answer not in the manual?
General| Type | Air to Water Heat Pump |
|---|---|
| Heating capacity | 5.0 kW |
| Energy efficiency class | A++ |
| Operating Temperature Range (Heating) | -25 to 35 °C |
| Refrigerant | R32 |
| Operating Temperature Range (Cooling) | 10 to 46 °C |
Explains the severity and probability of warning symbols used in the manual.
Critical warning about disconnecting power before working on electrical parts to prevent severe injury.
Warning against touching hot or cold piping and internal parts to avoid burns or frostbite.
Details critical precautions for handling R410A refrigerant, emphasizing cleanliness and dryness.
Outlines general criteria for selecting an installation site, focusing on ventilation and safety.
Details the maximum allowable lengths and height differences for refrigerant piping.
Describes the procedures for conducting both vacuum and pressure leak tests to ensure system integrity.
Details the process of vacuum drying to remove moisture from the refrigerant piping system.
Provides tables and instructions for calculating additional refrigerant needed for ERHQ models based on piping length.
Provides a formula for calculating additional refrigerant needed for ERLQ models based on piping length.
Details the procedure for completely recharging the system, including necessary amounts and vacuum drying.
Highlights crucial precautions for electrical wiring, including safety, compliance, and connection methods.
Guides on connecting the power supply and interunit wiring, including cable management.
Lists essential pre-run checks for electrical wiring, refrigerant piping, and extra refrigerant.
Details how to perform the test run to ensure all functions and parts are working correctly.
To Next Page