What to do if Daikin ATXS35EV1B7 Air Conditioner has an abnormal functioning during operation?
If your Daikin Air Conditioner is malfunctioning during operation, it may be due to interference from lightning or radio waves. To resolve this, turn the breaker OFF, then turn it back ON, and try operating the air conditioner with the remote controller.
What to do if Daikin ATXS35EV1B7 heating stops suddenly and a flowing sound is heard?
If the heating operation of your Daikin Air Conditioner stops suddenly and you hear a flowing sound, you should wait for about 3 to 8 minutes.
What to do if Daikin ATXS35EV1B7 power cord is abnormally hot or damaged?
If the power cord of your Daikin Air Conditioner is abnormally hot or damaged, turn the breaker OFF and call the service shop.
General| Model | ATXS35EV1B7 |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Class (Cooling) | A+++ |
| Energy Efficiency Class (Heating) | A++ |
| Indoor Unit Noise Level | 19 dB(A) |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
Lists all functions available for the unit models, categorized by function type.
Details technical specifications for indoor and outdoor units, including capacities and dimensions.
Illustrates PCB layout and connector assignments for indoor and outdoor units.
Explains primary operational functions like frequency control and airflow direction.
Describes the role of thermistors in controlling unit operations and detecting issues.
Details system control logic, mode hierarchy, and operating parameters.
Discusses post-installation operation and handling for optimal user experience.
Provides general guidance and important information for operating the unit.
Outlines critical safety warnings and cautions for handling and operation.
Details steps required before initial operation, including battery setup.
Explains how to select and use different operating modes for heating and cooling.
Describes the function to maximize cooling/heating effect for quick temperature adjustment.
Explains the energy-saving mode that reduces power consumption and capacity.
Details the sensor-based operation for energy saving by detecting human presence.
Provides essential warnings and guidelines before starting diagnostic procedures.
Lists common operational issues and their corresponding solutions or checks.
Explains how to access and use the unit's self-diagnostic check function via the remote controller.
Covers error codes, their descriptions, and detailed troubleshooting steps for various malfunctions.
Details the process for removing and cleaning the air filter.
Guides on how to safely remove the front panel for access to internal parts.
Outlines the steps for safely removing the electrical box containing PCBs and wiring.
Details the process for removing the printed circuit boards from the unit.
Covers the removal of panels, discharge grille, front panel, and fan motor.
Explains how to remove the electrical box containing PCBs and wiring.
Details the process for removing the printed circuit boards from the outdoor unit.
Guides on how to remove the four-way valve, including heating and safety precautions.
Details the procedure for removing the compressor, including safety warnings.
Covers miscellaneous topics not fitting into other main categories.
Explains how to perform a trial operation using the remote controller for testing.
Details jumper settings for configuring unit functions, such as auto-restart.
Provides instructions on applying silicon grease for heat dissipation during PCB replacement.
Presents diagrams illustrating the refrigerant piping layout for indoor and outdoor units.
Offers detailed wiring diagrams for the indoor and outdoor unit electrical systems.
To Next Page