Daikin BRP069A71 - 6 Starting up the System

6 | Starting up the system
Installer reference guide
13
BRP069A71
WLAN adapter Heating
4P624189-1 – 2020.06
6 Starting up the system
The adapter gets its power from the indoor unit. For the adapter to function, make
sure it is connected to the indoor unit, and the indoor unit is powered on.
After powering on the system, the RUN and AP LEDs light up and go out again after
the adapter is operational. Depending on the system layout, it can take up to 1
minute before the adapter is operational.
INFORMATION
Before starting up the system, make sure that the adapter is closed and properly
mounted to the indoor unit.