4 | Preparation
Installer reference guide
6
BRP069A78
WLAN cartridge Heating
4P624190-1 – 2020.06
4 Preparation
4.1 Installation site requirements
▪ The adapter is designed to be mounted to the indoor unit, in dry, indoor
locations only.
▪ The adapter is designed to operate in ambient temperatures ranging from
5~35°C.
Do NOT install the adapter in the following places:
▪ In places where it is exposed to direct sunlight.
▪ In places where it is near a heat source.
▪ In places where it is exposed to a source of steam.
▪ In places where it is exposed to machine oil vapour.
To Next Page
