English 8
Installation
Warning
Always turn off the power supply
when installing. (Touching the
electrical parts can cause an elec-
tric shock.) The main switch of the
installation is at the outdoor unit.
1 Choosing and installation site
The WLAN adapter should be sited in a place where:
The adapter is not in the path of direct sunlight.
The adapter is away from the source of heat or steam.
There is not source of machine oil vapour (this may shorten indoor
unit life).
The adapter is at least 1 m away from any television or radio set
(unit may cause interference with the picture or sound).
Distance between the indoor unit and the WLAN adapter is within
lenght of WLAN cable.
2 Remove the adapter case (upper).
Remove the upper case of the wireless LAN adapter.
Installation
Work
Wireless LAN
connecting adapter
printed circuit board
Adapter case (upper)
Adapter case (lower)
To Next Page
Loading...
