PRODUCT IDENTIFICATION
4
The model and manufacturing number are used for positive identification of component parts used in manufacturing. Please
use these numbers when requesting service or parts information.
D C C 090 045 5 D * * *
A
*
1 2 3 4, 5, 6 7, 8, 9 10 11 12 13 14
15 16
Brand
DDaikin
Major & Minor
Configuration
C Commercial Standard Efficiency X No Options
Application
C Cooling X
HHeat Pump S
Nominal Gross Cooling Capacity
X No Options
036 3 Tons 102 8½ Tons V Low-Leak Downflow Economizer
048 4 Tons 120 10 Tons
060 5 Tons 180 15 Tons
2
Please use part number DPE36722 / DPE36724 / DPE36727 if Pow er Exhaust is required
072 6 Tons 240 20 Tons
090 7½ Tons 300 25 Tons
BBelt Drive
D Direct Drive
Nominal Heating Capacity
Gas/Electric A/C H/P Factory-Installed Electric Heat
180 180,000 BTU/h XXX No Heat 030 30 kW 1 208-230/1/60 (United States) 4 460/3/60 (United States)
300 300,000 BTU/h 016 15 kW 045 44 kW 3 208-230/3/60 (United States) 5 400/3/50 (Russia Daikin Brand)
350 350,000 BTU/h 6 400/3/60 (Saudi Arabia) A 400/3/50 (Russia Goodman Brand)
B 400/3/50 (Kuwait) E 400/3/50 (Argentina)
See product specifications for heat size(s) available for each capacity.
Factory- Installed Options
Note: Not all options available for all products.
• Economizers (Downflow): Based on air conditions, can provide outside air to cool the space.
oltage
Revision Levels
Factory-Installed Options
Factory-Installed Options
Factory-Installed Options
Standard Aluminized Heat Exchanger
Stainless Steel Heat Exchanger
Supply Fan/Drive Type/Motors
To Next Page
Loading...
Need help?
General