To Next PageTo Next Page
Need help?Do you have a question about the Daikin DCH150 Series and is the answer not in the manual?
General| Series | DCH150 |
|---|---|
| Refrigerant | R410A |
| Operating Temperature Range (Cooling) | -5°C to 46°C |
| Type | Heat Pump |
| Heating Capacity | 16.0 kW |
| Cooling Capacity | 14.0 kW |
| Power Supply | 3 Phase, 380-415V, 50Hz |
Guidelines for safe handling of refrigerants and related hazards.
High voltage safety precautions and general wiring guidelines.
A chart to diagnose cooling system issues based on symptoms and causes.
Procedure for measuring supply voltage and identifying voltage imbalances.
Testing procedures for loss of charge, high, and low pressure controls.
Methods for testing run and start capacitors using resistance and capacitance checks.
Procedures for testing PSC and EEM motor windings for continuity and grounding.
Testing compressor windings for continuity and performing ground tests.
Common causes for unsatisfactory operation of heat pumps on the heating cycle.
Guidelines for safe refrigerant handling, brazing, and leak detection.
Detailed steps for system evacuation and refrigerant charging.
Methods for checking compressor efficiency and system superheat.
Steps for dealing with compressor burnout and checking external static pressure.
