PRODUCT IDENTIFICATION
8
MODEL # MFG # DESCRIPTION
DEH UM 1
P1227801F
Dehumidistat
. For use with Daikin Brand. Wall mounted, 24 volt humidity control to reduce the
airflow in the air conditioning mode to lower the humidity in an occupied home. This control
features a moisture-sensitive nylon element and also provides positive ON-OFF settings for
manual operation. The control is a normally closed switch that opens on humidity rise causing
the blower to switch to a lower speed to control the humidity within the structure.
EFR01
P1221001
P1221002F
External Filter Rack Kit
. For use with Daikin upflow gas furnace models. This kit is intended to
provide a location, external to the furnace casing, for installation of a permanent filter. The rack
is mounted over the indoor air blower compartment area of either side panel, and provide filter
retention as well as a location for attaching return air ductwork.
HA02
P1129112F
High Altitude Kit
. The kit is designed to convert Daikin Brand 80% gas furnace models at
higher altitudes. This kit is required when installing these furnaces above their maximum rated
altitude. This kit contains # 43-49, 55-58 gas orifices. The orifices in the kit have been selected
as a result of testing with the American Gas Association. They will provide appropriate derating
at the altitude listed in the High Altitude Charts as shown in the installation instructions of the kit.
To Next Page
Loading...
Need help?
General
