Daikin DR96TC0603BN - User Manual

To Next Page

SS-DR96TC_DD96TC-R32 www.daikincomfort.com 12/24

DR96TC / DD96TC

■ Contents

Nomenclature ........................................ 2

Product Specicaons ........................... 3

Dimensions ............................................ 5

Airow Data ........................................... 7

Wiring Diagram ...................................... 9

Accessories .......................................... 10

Two-Stage, Variable-Speed

Communicating

ECM Gas Furnace

Up to 96% AFUE

Heating Input: 40,000 –120,000 BTU/h

■ Standard Features ■ Cabinet Features

• Compable with Daikin One+ smart thermostat

and other Daikin communicang equipment

• Heavy-duty stainless-steel tubular heat exchanger

• Stainless-steel secondary heat exchanger

• Two-stage gas valve provides quiet, economical heang

• Durable Silicon Nitride igniter

• Quiet two-speed induced dra blower

• Self-diagnosc control board with constant memory

fault code history output to a dual 7-segment display

• Color-coded low-voltage terminals with provi-

sions for electronic air cleaner and humidier

• Ecient and quiet variable-speed airow system gently

ramps up or down according to heang or cooling demand

• Mulple connuous fan speed opons oer

quiet air circulaon

• Auto-Comfort and enhanced dehumidicaon

modes available

• Can no longer be installed in California’s

South Coast Air Quality Management District

(SCAQMD) on or aer October 1, 2019

• AHRI Cered; ETL Listed

• Designed for mul-posion installaon:

DR96TC: Upow, horizontal le or right

• Cered for direct vent (2-pipe) or non-direct vent (1-pipe)

• Easy-to-install top venng with oponal side venng

• Convenient le or right connecon

for gas and electrical service

• Cabinet air leakage (QLeak) ≤ 2%

• Heavy-gauge steel cabinet with durable nish

• Fully insulated heat exchanger and blower secon

• Airght solid boom or side return with easy-cut tabs

for eortless removal in boom air-inlet applicaons

* Complete warranty details available from your local dealer or at

www.daikincomfort.com. To receive the Lifetime Heat Exchanger Limited

Warranty (good for as long as you own your home), the 12-Year Unit Replacement Limited

Warranty and the 12-Year Parts Limited Warranty, online registraon must be completed within

60 days of installaon. Addional requirements for annual maintenance are required for the Unit

Replacement Limited Warranty. Online registraon and some of the addional requirements are

not required in Florida, California, or Québec. The duraon of warranty coverage in Texas and

Florida diers in some cases. Other limitaons and exclusions apply; refer to complete warranty

details for a full list of limitaons and exclusions.

Main Page

Need help?

Do you have a question about the Daikin DR96TC0603BN and is the answer not in the manual?

The Daikin DR96TC / DD96TC is a two-stage, variable-speed communicating ECM gas furnace designed for residential heating applications, offering up to 96% AFUE (Annual Fuel Utilization Efficiency). It is capable of providing heating inputs ranging from 40,000 to 120,000 BTU/H.

Function Description:

This gas furnace is a central component of a home heating system, designed to efficiently convert natural gas into heat and distribute it throughout the living space. Its two-stage operation allows for more precise temperature control and energy savings by operating at a lower capacity during milder weather and increasing to full capacity when demand is higher. The variable-speed ECM (Electronically Commutated Motor) blower further enhances efficiency and comfort by providing consistent airflow and quiet operation. As a communicating furnace, it can integrate with Daikin One+ smart thermostats and other Daikin communicating equipment, enabling advanced control features, diagnostics, and optimized system performance.

Important Technical Specifications:

Heating Input: Available in various models with high-fire inputs from 40,000 to 120,000 BTU/H.
Heating Output: High-fire outputs range from 38,440 to 115,320 BTU/H. Low-fire inputs range from 28,000 to 84,000 BTU/H, with corresponding outputs from 26,908 to 80,724 BTU/H.
AFUE: All models boast a 96.1% AFUE, indicating high energy efficiency.
Temperature Rise Range: High/Low fire temperature rise ranges vary by model, typically between 20-50°F and 35-65°F.
Vent Diameter: Utilizes 2"-3" vent diameters, depending on the model and installation requirements.
No. of Burners: Models feature 2, 3, 4, 5, or 6 burners.
Circulator Blower: Equipped with variable-speed ECM motors (1/2 HP, 3/4 HP, or 1 HP) operating at 1075 RPM. Available AC at 0.5" ESP ranges from 1.5-3 to 2-5.
Filter Size: Uses 16"x25" (side or bottom) or 20"x25" (bottom) filters, with some models accommodating two 16"x25" side filters. DD96TC models may use 10"x20" or 14"x20" filters (top or bottom return).
Electrical Data: Minimum circuit ampacity ranges from 7.6 to 13.9, with maximum overcurrent device (fuse/breaker) ratings of 15 or 20 amps.
Dimensions (W x D x H): Cabinet widths include 17½", 21", and 24½", with a consistent depth of 28%" and height of 34½".
Gas Valve: Two-stage operation for modulated heating.
Igniter: Durable Silicon Nitride igniter.
Induced Draft Blower: Quiet two-speed operation.
Heat Exchanger: Heavy-duty stainless-steel tubular primary heat exchanger and stainless-steel secondary heat exchanger.
Cabinet Air Leakage (QLeak): ≤ 2%, ensuring minimal energy loss.
Certifications: AHRI Certified and ETL Listed.

Usage Features:

Communicating Capability: Seamless integration with Daikin One+ smart thermostats and other Daikin communicating equipment for enhanced control and system optimization.
Multi-Position Installation: Designed for versatile installation, including upflow, horizontal left or right (DR96TC), and downflow/horizontal (DD96TC) configurations.
Two-Stage Heating: Provides quiet and economical heating by adjusting heating capacity to match demand, reducing temperature swings and improving comfort.
Variable-Speed Airflow: The ECM blower gently ramps up and down for both heating and cooling, minimizing noise and ensuring consistent air distribution.
Continuous Fan Options: Multiple continuous fan speeds are available to provide quiet air circulation and improve indoor air quality.
Auto-Comfort and Enhanced Dehumidification: These modes are available to optimize comfort and manage humidity levels within the home.
Direct Vent or Non-Direct Vent: Certified for both 2-pipe direct vent and 1-pipe non-direct vent applications.
Easy Venting and Connections: Features easy-to-install top venting with optional side venting, and convenient left or right connections for gas and electrical service.
Quiet Operation: Two-speed induced draft blower and variable-speed ECM motor contribute to a quieter home environment.

Maintenance Features:

Self-Diagnostic Control Board: Equipped with a control board that features constant memory fault code history, displayed on a dual 7-segment display for easy troubleshooting and diagnostics.
Color-Coded Low-Voltage Terminals: Simplifies wiring and includes provisions for electronic air cleaner and humidifier connections.
Durable Construction: Heavy-gauge steel cabinet with a durable finish, fully insulated heat exchanger, and blower section for longevity and reliable performance.
Airtight Return: Solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications, simplifying filter changes and maintenance.
Clearances: Requires a 24" front clearance for servicing or cleaning, with specific minimum clearances to combustible materials for sides, rear, front, bottom, flue, and top, ensuring safe operation and accessibility for maintenance.
Warranty: Comes with a Lifetime Heat Exchanger Limited Warranty, a 12-Year Unit Replacement Limited Warranty, and a 12-Year Parts Limited Warranty. Online registration within 60 days of installation is required to receive these warranties, with additional requirements for annual maintenance for the Unit Replacement Limited Warranty. Specific terms and conditions apply, and warranty coverage may vary by region.