Installer:
As a professional installer you have an obligation to know
the product better than the customer. This includes all
safety precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it is
possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
safety practices...follow them.
The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
the content of this manual, the precautions listed here take
precedence.
(Type FSP CATEGORY IV Direct or Non Direct Vent Air Furnace)
IOD-2037A
09/2023
PRODUCT USING
HEAT EXCHANGER
INSTALLATION INSTRUCTIONS
These furnaces comply with requirements embodied
in the American National Standard / National Standard
of Canada ANSI Z21.47·CSA-2.3 Gas Fired Central
Furnaces.
© 2023
19001 Kermier Rd. Waller, TX 77484
www.daikincomfort.com
* Please contact your distributor or our website for
To Next Page
Need help?
General
