Daikin EBHQ006BAV3 Operation Manuals

Daikin EBHQ006BAV3

8 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

OPERATION MANUAL

EBHQ006BAV3

EBHQ008BAV3

Unit for air to water heat pump system

Table of Contents

Other manuals for Daikin EBHQ006BAV3

Operation Manual20 pages

Installation Manual52 pages

Questions and Answers:

T
Tammy BarberAug 20, 2025
Why is my Daikin EBHQ006BAV3 Heat Pump not heating or cooling properly?
- E
  emily59Aug 20, 2025
  If your Daikin Heat Pump is on but not heating or cooling as expected, it might be due to several reasons. First, verify that the temperature setting on the controller is correct. Second, ensure sufficient water flow by checking that all shut-off valves are fully open, cleaning the water filter if needed, removing any air from the system, confirming the water pressure is above 1 bar when the water is cold, setting the pump speed to the highest level, and ensuring the expansion vessel is intact. Finally, confirm that the water volume in the system exceeds the minimum required amount.
T
Thomas GutierrezAug 22, 2025
What to do if the Daikin EBHQ006BAV3 Heat Pump schedule timer is programmed but does not work?
- J
  Joseph DownsAug 22, 2025
  If the schedule timer on your Daikin Heat Pump is programmed but not working, make sure the 'pr' icon is displayed. If it's not, press the 'pr' button to activate the schedule timer.
P
Patricia HansonAug 25, 2025
What to do if the schedule timer is programmed but does not work on Daikin Air conditioning?
- S
  Sarah BryantAug 25, 2025
  If the schedule timer on your Daikin Air conditioning is programmed but not working, make sure the 'pr' icon is displayed. If it isn't, press the 'pr' button to enable the schedule timer.
J
Joshua BlackAug 26, 2025
What to do if my Daikin EBHQ006BAV3 compressor is not starting?
- W
  walkerbrandonAug 26, 2025
  If your Daikin Heat Pump's compressor isn't starting for space or domestic water heating, there could be a few reasons. If the water temperature is too low, the system will use the backup heater first to reach a minimum of 15°C. Check that the backup heater's power supply is correct, the thermal fuse is closed, the thermal protector isn't activated, and the contactors aren't broken. Also, ensure that the benefit kWh rate power supply settings and electrical connections match the wiring instructions. If a benefit kWh rate signal was sent by the electricity company, wait for the power to return.
J
Jennifer EllisonAug 27, 2025
Why is my Daikin EBHQ006BAV3 Heat Pump schedule timer running at the wrong time?
- J
  Joe CastilloAug 27, 2025
  If the schedule timer on your Daikin Heat Pump is running, but the programmed actions occur at the wrong time, verify that the clock and day of the week are set correctly. Correct them if needed.
G
George NashAug 29, 2025
How to fix a blank display on my Daikin Heat Pump remote controller?
- C
  Carlos EdwardsAug 29, 2025
  If your Daikin Heat Pump remote controller display is blank, check that the main power is connected to your installation. Also, verify if the benefit kWh rate power supply is active.
J
Julie MeyerAug 31, 2025
How to improve space heating capacity of Daikin Heat Pump at low outdoor temperatures?
- L
  Lindsay DavisAug 31, 2025
  If you're experiencing a space heating capacity shortage with your Daikin Heat Pump at low outdoor temperatures, consider the following: * Ensure that the backup heater operation is activated. * Check that the backup heater equilibrium temperature is configured correctly. * Verify that not too much heat pump capacity is used for heating domestic hot water.
P
Philip GonzalesSep 2, 2025
How to change Daikin EBHQ006BAV3 temperature display from Fahrenheit to Celsius?
- M
  Mary LewisSep 2, 2025
  If the temperature on your Daikin Heat Pump remote controller is displayed in °F instead of °C, you may have accidentally changed the setting. To change it back to °C, push the ib and jb buttons simultaneously for 5 seconds. Repeat the procedure to change back to °F. The default temperature display is in °C.
B
bcurtisSep 5, 2025
Why is my Daikin Heat Pump pump making noise?
- K
  Kendra BlackSep 5, 2025
  If your Daikin Heat Pump's pump is making noise (cavitation), it could be due to air in the system. Purge air. Another possible cause is low water pressure at the pump inlet. Check the manometer to ensure sufficient water pressure (it should be >1 bar when the water is cold). Also, check that the manometer and expansion vessel are not broken.
N
Nathaniel BlackSep 7, 2025
What to do if the Daikin EBHQ006BAV3 Heat Pump water pressure relief valve opens?
- J
  Jessica RichardsSep 7, 2025
  If the water pressure relief valve on your Daikin Heat Pump opens, it could be because the expansion vessel is broken. In this case, replace the expansion vessel. Another possibility is that the water volume in the installation is too high. Ensure that the water volume is under the maximum allowed value.

Daikin EBHQ006BAV3 Specifications

General

Model	EBHQ006BAV3
Category	Heat Pump
Heating Capacity	6.0 kW
Energy Efficiency Class (Heating)	A++
Power Supply	50Hz

Related product manuals

Daikin Altherma EBHQ006BBV3

Preview: Daikin EBBH11DF9W

Daikin EBBH11DF9W

Daikin EBLA11DAV3

Daikin EBLA08E2V3

Daikin EBLA14DAW1

Daikin EBLA14DAV3

Daikin EBLA09DA3W1

Daikin EBLA14DA3V3

Preview: Daikin EBLA08E23V3

Daikin EBLA08E23V3

Daikin EBLA14DA3W1

Daikin EBLA11DA3V3

Daikin EBVH16SU23DJ6V