Daikin EBVH11S18+23DJ9W Installer's Reference Guide

11 | Configuration
Installer reference guide
163
ERLA11~16DAV3+W1 + EBVH/X11+16S18+23DJ
Daikin Altherma 3 R F
4P643602-1 – 2021.09
Types of weather-dependent curve
There are 2 types of weather-dependent curves:
▪ 2-points curve
▪ Slope-offset curve
Which type of curve you use to make adjustments, depends on your personal
preference. See "11.5.4Using weather-dependent curves"[4165].
Availability
The weather-dependent curve is available for:
▪ Main zone - Heating
▪ Main zone - Cooling
▪ Additional zone - Heating
▪ Additional zone - Cooling
▪ Tank (only available to installers)
INFORMATION
To operate weather dependent, correctly configure the setpoint of the main zone,
additional zone or tank. See "11.5.4Using weather-dependent curves"[4165].
11.5.2 2-points curve
Define the weather-dependent curve with these two setpoints:
▪ Setpoint (X1, Y2)
▪ Setpoint (X2, Y1)
Example
Y1
Y2
X1 X2
a

Daikin EBVH11S18+23DJ9W Specifications

General

Brand	Daikin
Model	EBVH11S18+23DJ9W
Category	Heat Pump
Language	English