Why won't the compressor start on my Daikin Chiller?
The compressor of your Daikin Chiller might not start due to high ambient conditions, a large switching rate (more than six hours at an ambient temperature of 55°C inside the switchbox), or other actions causing the heater sink temperature to increase.
What to do if my Daikin Chiller stops without an alarm?
If your Daikin Chiller stops operating without any alarm on the central controller, the thermal protection might be active. You can reset it by switching the power off and then on again after waiting for 10 minutes.
Details technical specifications, electrical data, installation outlines, and outlook drawings for chillers.
Describes refrigeration circuits and installation outlines for water piping.
Covers main functions, switch box, PCB, and wiring diagrams for chiller systems.
Explains operational ranges, flow charts, compressor status, and various control functions.
Details the digital controller, its interface, keys, LEDs, parameters, and options.
Provides an overview of digital and analog inputs/outputs and I/O PCB connections.
Lists alarm codes, warning indicators, and safety device functions.
Guides on checking temperature sensors, PCB inputs/outputs, and electrical errors.
Covers items to check, repair procedures, and component replacement steps.
Details general, water piping, static pressure, and electrical checks before operation.
Provides measurable data for pressures, temperatures, voltages, currents, and fuses.
Explains maintenance of main parts, control devices, and periodical checks.
To Next Page
General