ESIE11-02 Pre-Test Run Checks
Part 4 – Commissioning and Test Run 4–9
3
4
5
1
Symbols The table below describes the symbols.
Selecting a flow outside the curves can cause damage to or malfunction of the unit. See also
minimum and maximum allowed water flowrange.
See "Technical Specifications: EUWA*5-8KBZW1" on page 1–5, "Technical Specifications:
EUWA*10-12KBZW1" on page 1–8, "Technical Specifications: EUWA*16-20KBZW1" on page 1–
11, "Technical Specifications: EUWA*24KBZW1" on page 1–14.
Symbol Description
SP Static pressure of the unit
WF Waterflow rate
(1) EUWA*5KBZW1
(2) EUWA*8KBZW1
(3) EUWA*10KBZW1
(4) EUWA*12KBZW1
(5) EUWA*16KBZW1
(6) EUWA*20KBZW1
(7) EUWA*24KBZW1