To Next PageTo Next PageWhat causes Daikin EWAQ050BAW error code UA?
Daikin Chiller error code UA indicates a type connection problem. Wait until the initialization between the outdoor module and hydro module is finished (after power ON, wait at least 12 minutes). If the issue persists, contact your local dealer.
What causes Daikin EWAQ050BAW error code A1?
Daikin Chiller error code A1 indicates a failure of writing memory (EEPROM error). Contact your local dealer.
What does Daikin Chiller error code C1 mean?
Daikin Chiller error code C1 indicates bad ACS communication. Contact your local dealer.
General| Model | EWAQ050BAW |
|---|---|
| Category | Chiller |
| Cooling Capacity | 50 kW |
| Power Supply | 380-415V, 3Ph, 50Hz |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Weight | 280 kg |
Defines safety warnings, symbols, and their severity.
Guidelines for selecting a suitable and safe installation site.
Detailed site requirements, including space, stability, and environmental factors.
Instructions for preparing the water circuit connections and fittings.
Guidelines for safely preparing and executing electrical connections.
Procedures for safely unpacking and inspecting the chiller unit.
Steps for correctly placing and securing the unit on its foundation.
Component breakdown and diagrams of the chiller unit.
Detailed instructions for connecting and preparing the water piping system.
Steps for safely connecting the unit's electrical wiring and power supply.
Settings and configurations required for the unit's operation.
Configuration options available through the remote controller interface.
Guide for operating the unit in cooling mode.
Guide for operating the unit in heating mode.
Programming and managing the unit's operation schedule.
Detailed guide on setting and viewing programmed schedules.
A comprehensive table listing all field settings, defaults, and ranges.
