What to do if my Daikin Water Dispenser has water flow to water heat exchanger too low?
If the water flow to the water heat exchanger is too low in your Daikin Water Dispenser, increase the water flow.
What to do if my Daikin Water Dispenser has failure of one of the phases?
If one of the phases has failed in your Daikin Water Dispenser, check fuses on the supply panel or measure the supply voltage.
What to do if my Daikin Water Dispenser has shortage of refrigerant?
If your Daikin Water Dispenser has a shortage of refrigerant, check for leaks and refill refrigerant, if necessary.
What to do if my Daikin Water Dispenser has loose connections?
If you suspect loose connections in your Daikin Water Dispenser, inspect the connections of the field wiring and the internal wiring of the unit and tighten all loose connections.
Why is the water flow to the Daikin Water Dispenser's condenser too low?
If the water flow to the condenser of your Daikin Water Dispenser is too low, increase the water flow and/or check the strainer for clogging.
What to do if my Daikin Water Dispenser has a power supply failure?
If your Daikin Water Dispenser is experiencing a power supply failure, check the voltage on the supply panel.
Why is my Daikin Water Dispenser unit in manual mode (all compressors at 0%)?
General| Cooling Capacity | 45 kW |
|---|---|
| Heating Capacity | 50 kW |
| Refrigerant | R-410A |
| Compressor Type | Scroll |
| Sound Level | 65 dB(A) |
| Type | Air Cooled Chiller |
| Power Supply | 400V, 3Ph, 50Hz |
To Next Page
