20
TIMER Operation TIMER Operation
To use WEEKLY TIMER operation
Setting mode
•Make sure the day of the week and time are set.
If not, set the day of the week and time.
Page 9
6:00 8:30 17:30 22:00
25°C 27°C
Programme 1 Programme 2 Programme 3 Programme 4
ON OFF ON OFF
[Monday]
Setting Displays
Day and number ON/OFF Time Temperature
1. Press .
•The day of the week and the reservation number of the current day will be displayed.
•1to4settingscanbemadeperday.
2. Press to select the desired day of the week
and reservation number.
•Pressing changes the reservation number and the day of the week.
3. Press .
•The day of the week and reservation number will be set.
•“
”and“ ”blink.
4. Press to select the desired mode.
•Pressing changesthe“ ”or“ ”settinginsequence.
ON TIMER OFF TIMER
blank
No Setting
Pressing puts the sequence in reverse.
•Incasethereservationhasalreadybeenset,selecting“blank”deletesthereservation.
•Proceed to STEP
9if“blank”isselected.
•To return to the day of the week and reservation number setting, press
.
5. Press .
•The ON/OFF TIMER mode will be set.
•“
”andthetimeblink.
WEEKLY TIMER Operation
01_EN_3P642602-1E.indd 20 25-Feb-21 11:19:19 AM