To Next PageTo Next PageWhy Daikin FAY71FVE Air Conditioner system does not operate at all?
If your Daikin Air Conditioner system isn't operating at all, here are a few things to check: * First, see if there's a power failure and wait until power is restored. * Second, check for any blown fuses and turn off the power supply. * Third, check if the breaker is blown and turn the power on with the breaker switch in the ON position.
What to do if Daikin Air Conditioner stops after starting?
If your Daikin Air Conditioner stops operating after starting, examine these potential causes: 1. Check the air inlets and outlets of both the outdoor and indoor units. If there are any obstructions, remove them to ensure proper ventilation. 2. Inspect the air filter. If it's clogged, have a qualified service person clean it for you.
What to do if Daikin FAY71FVE Air Conditioner displays 'INSPECTION' and 'MALFUNCTION CODE'?
If the display on your Daikin Air Conditioner shows 'INSPECTION', 'UNIT No.', and the OPERATION lamp is flashing along with a 'MALFUNCTION CODE', notify your Daikin dealer and provide them with the display information.
General| Brand | Daikin |
|---|---|
| Model | FAY71FVE |
| Category | Air Conditioner |
| Language | English |
Lists and describes components of the remote controller for identification.
Explains various icons, messages, and indicators shown on the remote control display.
Describes the function of each button on the remote control for operation and settings.
Details on operating the system in Cooling, Heating, Automatic, Fan, and Program Dry modes.
Explains defrost operation and how outside temperature affects heating capacity.
Instructions for adjusting the air flow direction vertically and horizontally.
Guidance on optimal air flow flap positions for cooling and heating.
Steps for programming the timer to start or stop the system.
Procedures for preparing the unit for extended periods of non-operation.
Step-by-step guide for cleaning the air filter and resetting the indicator.
Instructions for cleaning the air outlet and outside panels of the unit.
Procedures for starting the unit after extended periods of inactivity.
Explains common reasons why the system may not start immediately.
Explains the cause of white mist appearing from the unit.
Describes various sounds the unit might make during operation.
Explains minor indicators like dust emission, odors, and controller display patterns.
Steps for immediate malfunctions and when to contact the dealer for repair.
Troubleshooting common problems like system stopping or not cooling/heating effectively.
