EasyManua.ls Logo

Daikin FAQ100CVEB - User Manual

Daikin FAQ100CVEB
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPLIT SYSTEM Air Conditioner
OPERATION MANUAL
MODELS
(Wall mounted type)
FAQ71CVEB FAQ100CVEB
English
Deutsch
Français
Español
Italiano
Nederlands
Portugues
3P184442-10J.book Page 1 Thursday, October 27, 2011 6:17 PM

Other manuals for Daikin FAQ100CVEB

Questions and Answers:

Daikin FAQ100CVEB Specifications

General IconGeneral
BrandDaikin
ModelFAQ100CVEB
CategoryAir Conditioner
LanguageEnglish

Summary

Disposal Requirements

What to Do Before Operation

Precautions for Group Control System or Two Remote Controller Control System

Details on operating the Daikin system with group or dual remote controls.

Safety Precautions

Key Safety Precautions and Warnings

Covers health, operational, fire, and environmental safety aspects.

Operation Range

Regarding Wiring

Instructions for proper electrical wiring by authorized electricians.

Pay Attention to Running Noises

Guidance on selecting locations considering running noises and vibrations.

Regarding Drainage of Drain Piping

Ensuring correct drain piping for complete drainage and preventing leaks.

Operation Characteristics

Cooling Operation Characteristics

Describes cooling operation modes, including automatic and frost prevention.

Heating Operation Characteristics

Details heating operation modes, including warm-up and frost removal.

Defrost Operation

Explains the frost removal process for the outdoor unit during heating.

Outside Air Temperature & Heating Capacity

Discusses how outside temperature affects heating capacity and recommendations.

Program Dry Operation Characteristics

Airflow Direction Adjustment

Instructions on adjusting airflow direction using the remote controller.

Airflow Flap Movement

Details how the airflow flap direction is controlled by microcomputer.

Recommended Flap Positions

Recommendations for optimal airflow flap positions during cooling and heating.

Optimum Operation

Left and Right Airflow Adjustment

How to adjust horizontal airflow direction flaps for preference.

General Operation Tips

Tips for efficient operation, including sunlight, ventilation, and placement.

Maintenance (For Service Personnel)

How to Clean Air Filter

Step-by-step guide for cleaning the air filter.

How to Clean Unit Exterior & Remote

Instructions for cleaning external parts of the unit and remote controller.

How to Clean Front Panel

Procedure for removing and cleaning the front panel.

Startup After Long Stop

Steps to take before operating the unit after a long period of inactivity.

Stopping System for Long Period

Procedure for safely shutting down the system for extended periods.

Not a Malfunction of the Air Conditioner

System Fails to Operate

Explains reasons for system non-operation, like safety delays or control issues.

Operation Sometimes Stops

Addresses intermittent stops due to electrical noise or communication issues.

Fan Speed Setting Differences

Explains discrepancies in fan speed settings or automatic adjustments.

Airflow Direction Not Specified

Covers issues with airflow direction control and automatic swing function.

Airflow Direction Differences and Unit Noises

Airflow Direction Differs from Display

Details differences between display and actual airflow direction in heating/cooling modes.

Airflow Flaps Do Not Close

Addresses airflow flaps not closing properly after operation stops.

White Mist Emission

Explains white mist emission during cooling in humid or dirty conditions.

Air Conditioner Noise

Describes normal operational noises like ringing, hissing, and squeaking.

Dust Emission from Units

Explains dust emission after periods of inactivity.

Units Give Off Odors

Discusses units absorbing and emitting room odors.

Trouble Shooting

System Does Not Operate at All

Troubleshooting steps for a system that fails to start operation.

System Stops After Operation

Checks for blocked inlets/outlets or clogged air filters after operation.

Insufficient Cooling or Heating

Diagnosing insufficient cooling or heating due to blockages, settings, or room conditions.

Unexpected Unit Start;Stop

Investigating unexpected unit starts or stops, possibly due to timers or control systems.

Critical Malfunction Indicators

Related product manuals