14 English
Contact the central control room that directed
the stop.
If the problem is not solved after checking the above
points, please do not try to repair it yourself. In such
cases, always ask your local dealer. At this time,
please tell the symptom and model name (written on
the manufacturer’s label).
If one of the following malfunctions occurs, take
the measures shown below and contact your
Daikin dealer.
The system must be repaired by a qualified service
person.
When the air conditioner is in abnormal con-
ditions (smell of something burning, etc),
unplug the power cord from the outlet
Continued operation under such circumstances
may result in a failure, electric shock, and fire.
Contact your dealer.
• If a safety device such as a fuse, a power circuit
breaker or an earth leakage breaker frequently
actuates;
Measure: Do not turn on the main power switch.
• If the ON/OFF switch does not properly work;
Measure: Turn off the main power switch
• If water leaks from unit.
Measure: Stop the operation.
• If the display “ ”, “UNIT No.”, and the OPER-
ATION lamp flash and the “MALFUNCTION
CODE” appears.
Measure: Notify your Daikin dealer and inform
him/her of the display.
OPERATION lamp
INSPECTION
display
MALFUNCTION
CODE
INDOOR UNIT
No. in which a
malfunction occurs
UNIT No.
C
L H
3P184442-10J_FM6.book Page 14 Wednesday, December 14, 2011 3:38 PM
To Next Page
Loading...
Need help?
General
