To Next PageTo Next Page
Need help?Do you have a question about the Daikin FDYAN60AV1 and is the answer not in the manual?
General| Model | FDYAN60AV1 |
|---|---|
| Category | Air Conditioner |
| Cooling Capacity | 6.0 kW |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
Identifies the product line and series covered in the manual.
Specifies the product category for the operation manual.
Lists the specific Daikin Ducted System R-32 Series model numbers covered.
Highlights critical precautions to prevent injury or damage due to misuse or installation.
Provides specific safety guidelines and warnings related to R32 refrigerant.
Details precautions for correct operation, filter usage, and child supervision.
Visual representation of the indoor and outdoor units and their connections.
Instructions for operating Daikin controllers and initial setup procedures.
Key steps and precautions to take before operating the system for the first time.
Information on how the unit automatically restarts after a power failure.
Details on using an optional second remote control for system management.
Precautions and tips for efficient and effective system operation.
Specifies the temperature and humidity limits for proper system operation.
Explains common sounds heard during cooling or defrost operations.
Describes dust blowing out from the unit after periods of inactivity.
Explains how the unit may emit absorbed room odors.
Indicates the meaning of the 'DD' display on the remote controller.
What to do if the unit shows signs of burning or other serious faults.
Steps to diagnose and resolve issues when the system does not start.
How to address problems where the system stops operating after a period.
Solutions for when the system operates but doesn't cool or heat effectively.
Essential safety rules to follow before performing any maintenance tasks.
Step-by-step guide for cleaning the air filters for optimal performance.
Instructions on how to clean the air outlet grille.
Procedures for resuming operation after an extended period of inactivity.
Guidelines for properly shutting down and storing the unit for extended periods.
How the unit diagnoses and reports faults using error codes.
Explains symptoms that are normal system behavior, not actual malfunctions.
