V INSTRUCTION TO OPERATION
5.1 On/Off
Press On/Off button to turn on the unit.
Repress this button to turn off the unit.
Note:The state shown in Fig.5.1 indicates off-state of the unit after energization. The state shown in Fig.5.2
indicates on-state of the unit after energization.
Fig.5.1 Off-state of the unit Fig.5.2 On-state of the unit
5.2 Mode Setting
Under on-state of the unit, press Mode button to switch the operation modes as the following sequence:
Auto Cooling Dry Fan Heating
English
10
To Next Page
Loading...
Need help?
General
