ESIE05-04 Wiring Diagrams
Part 1 – System Outline 1–89
A1P Printed circuit board Wired remote controller
C1R Capacitor (Fan) BS1 ON/OFF button
F1T Thermal fuse (136°C) (T1R embedded) BS2 Timer mode start/stop button
HAP Light emitting diode (Service monitor-green) BS3, BS8 Programming time button
M1F Motor (Fan) BS4, BS9 Temperature setting button
R1T Thermistor (Air) BS6 Operation mode selector button
R2T Thermistor (Coil) BS7 Timer ON/OFF button
RyF1-4 Magnetic relay (Fan) BS11 Fan speed control button
RyP Magnetic relay (Drain pump) BS12 Inspection/test operation button
SS1 Selector switch (Emergency) BS14 Filter sign reset button
T1R Power supply transformer (220~240V/21.8V) H1P Light emitting diode (Service monitor-red)
X1M Terminal strip LCD Liquid cristal display
X2M Terminal strip SS1 Selector switch (Main/sub)
RC Signal receiver circuit
TC Signal transmission circuit Connector for optional parts
X60A, X61A Connector (Interface adaptor for Sky Air/US
series)
Adaptor for wiring
RyC, RyF Magnetic relay X33A Connector (Adaptor for wiring)
X35A Connector (Group control adaptor)
X40A Connector (Remote ON/OFF, Forced OFF)
To Next Page
Loading...
