Disassembly and Maintenance ESIE05-04
5ā46 Part 5 ā Disassembly and Maintenance
1.12.3 Removal of Decoration Panel
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step Procedure Points
1 Removing the decoration
panel
1 Remove the switch box
cover and disconnect the
connector of swing motor
from the harness
connector of electric
parts.
2 Check that the
provisional hanger is in
the position where it can
be engaged with the hook
of switch box.
(S2636)
(S2637
Provisional hanger
Hook of switch box
(S2638)
To Next Page
Loading...
