RA Indoor Unit SiBE121135
188 Operation Manual
2.2.3 AUTO · DRY · COOL · HEAT · FAN Operation
1. Press and select a operation
mode.
To start operation
2. Press .
To stop operation
3. Press again.
To change the temperature setting
4. Press or .
: AUTO : HEAT
: DRY : FAN
: COOL
AUTO or COOL or HEAT operation DRY or FAN operation
The temperature setting is not variable.
The air conditioner operates with the operation mode of your
choice.
From the next time on, the air conditioner will operate with the
same operation mode.
• Each pressing of the button advances the mode setting
in sequence.
COOLING ONLY
model
HEAT PUMP
model
A
UTO · DRY · COOL · HEAT · FAN Operation
• “ ” is displayed on the LCD.
• The OPERATION lamp lights up.
• “ ” disappears from the LCD.
• Then OPERATION lamp goes off.
Press raise the temperature and
press lower the temperature.
Set to the temperature you like.
To Next Page
Loading...
