SiBE121135 Outdoor Unit: 40-75 Class
Removal Procedure 337
1. Outdoor Unit: 40-75 Class
Note: The illustrations are for heat pump models as representative.
1.1 Removal of Outer Panels
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
1
Appearance features Take care not to cut your
finger by the fins of the heat
exchanger.
2
Remove the 4 screws
(2 on both sides) of the
top panel.
(R5494)
(R12898)
Top panel
(R12899)
To Next Page
Loading...
