SiBE121135 Outdoor Unit: 40-75 Class
Removal Procedure 361
3. Remove the thermistors. When reassembling, meet
the edge of the thermistor
and the fixture.
1
Open the putty and
remove the liquid pipe
thermistors.
2
Pull out the gas pipe
thermistors.
3
Cut the clamp.
Pull out the outdoor
heat exchanger
thermistor.
Be careful not to lose the
clip.
The positions of the clamp
and outdoor heat exchanger
thermistor differ depending
on the model.
Step
Procedure Points
Liquid pipe
thermistor
(R11184)
Gas pipe
thermistor
(R5591)
Outdoor heat exchanger
thermistor
(R17171)
Clamp
Clip
(R5619)
To Next Page
Loading...
